In November last year — I started building a DIY security alarm system, using a Raspberry Pi as the controller. My plan was to make a self-sustained system, using proper alarm hardware — like PIR sensors and sirens.

Integration with Home Assistant would be an add-on, not a requirement. I wanted the system to be as redundant and fault-tolerant as I could make it.

This is a pretty long story, with some twists and turns — let’s get into it 👇

We have a Raspberry Pi driven digital calendar in the kitchen. I’m currently using crontab to turn the HDMI port off at night, and when we’re at work.

But a much more flexible solution is to control it using MQTT and Home Assistant. That way it can easily be automated to turn on when we’re home, if there is movement in the kitchen, or any number of conditions.

It’s really quite easy to do, here’s how 👇

As the weather is warming up here in Norway — my kids have gotten their bikes out. To make it more fun, both for them and me, I figured I’d build a series of traffic signals that they could play with.

I first started with a traffic light, simple — red, yellow and green. To control it I am using a Raspberry Pi Zero W, this will allow me to make it communicate on Wi-Fi and MQTT later.

My girlfriend wanted a digital calendar on the kitchen wall; I made one with a 24" monitor, a Raspberry Pi and DAKboard.

I’m using Prometheus to monitor my home office and homelab, I figured it would be cool to have a stack light show the active warnings and alerts from Alertmanager. So I made a HAT (Hardware Attached on Top) for the Raspberry Pi to drive a five-colored stack light.